Hinging The Rudder; Installing Vertical Stabilizer - Seagull Models YAK 11 Assembly Manual

RENO AIR CARE YAK-11 "PERESTROIKA"
8.

HINGING THE RUDDER

Glue the top two rudder hinges in place
using the same techniques used to hinge
the ailerons.
he lower hinge will be glued when the
i/rudder assembly is attached to the fu-
selage.
1.
INSTALL RUDDER CONTROL HORN
1.
Fiberglass control horn
26
Instruction Manual.
2.
3.
Rudder Fiberglass control horn

INSTALLING VERTICAL STABILIZER

1.
Using a modeling knife, remove the cov-
ering from over the precut hinge slot cut
into the lower rear portion of the fuselage.
hs slot accepts the lower rudder
hinge.
Epoxy