Hinging The Rudder - Seagull Models Maxi Lift SEA209N Assembly Manual

7) Repeat this process with the other wing
panel, securely hinging the aileron in place.
8) Ater both ailerons are securely hinged,
irmly grasp the wing panel and aileron to
make sure the hinges are securely glued and
cannot be pulled out. Do this by carefully ap-
plying medium pressure, trying to separate
the aileron from the wing panel. Use caution
not to crush the wing structure.
Note : Work the aileron up and down sev-
eral times to "work in" the hinges
and check for proper movement.

HINGING THE RUDDER.

Glue the rudder hinges in place using the
same techniques used to hinge the ailerons.
Hinge.
INSTALL THE AILERONS
CONTROL HORN.
Fiberglass control horn.
Aileron control horn.
INSTALL FLAP CONTROL HORN.
Install the lap control horn using the same
method as same as the aileron control horns.
Fiberglass control horn.
Epoxy.
Epoxy.
Epoxy.
.
.
.
5