Seagull Models YAK 11 Assembly Manual page 32

RENO AIR CARE YAK-11 "PERESTROIKA"
3.
4.
Epoxy
Epoxy canopy onto the fuselage. Trace
around the canopy and onto the fuselage
using a epoxy.
5.
INSTALLING THE BATTERY-RECEVER
Plug the servos leads and the switch lead
into the receiver. Plug the battery pack
lead into the switch also.
32
110mm
Epoxy
Instruction Manual.
Wrap the receiver and battery pack in
the protective foam rubber to protect
them from vibration.
Route the antenna in the antenna tube
inside the fuselage and secure it to the
bottom of fuselage using a plastic tape.
1.
2.
ATTACKMENT WING-FUSELAGE
1.
Battery
Receiver
Battery