Setbaud- Change The Baud Rate - Feasa 3D User Manual

FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
General Commands

SetBAUD- Change the baud rate

Transmit Receive
SetbaudX OK
Where: X = 9600,19200,38400,57600,115200,230400,460800
Description
This command will change the baud rate of the Serial and USB Port's in the
Analyser.
The default Port settings of the Analyser are 57,600, 8 Data bits, 1 Stop bit and
No Parity.
The maximium allowed baud rate for Serial Port is 115200 and the USB Port is
460800.
Example:
To change the baud rate to 9600 transmit the command setbaud9600 to the
Analyser .
Setbaud9600
OK
Back to Index
© Copyright Feasa Enterprises Ltd 62