FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
Daisy Chain Mode
Daisy Chain USB Method
The Daisy chain is a method used to communicate with multiple Display
Analyser units to save connections and simplify the wiring.
The 1
st
Display Analyser in the chain is connected to the computer using the
USB cable supplied. The remaining Display Analysers are interconnected in a
Daisy Chain Bus using the cables provided. The Daisy Chain OUT connector on
Display Analyser No1 is connected to the Daisy Chain IN Connector on Display
Analyser No2 and so on.( See Fig 9a below). Each Analyser except for No1 must
be powered to 5V @180mA. This completes your wiring requirements.
Figure 9a USB Setup
© Copyright Feasa Enterprises Ltd
44