Physical Layout; Usb Port Control - Feasa 3D User Manual

Physical Layout

LED
USB
Serial
The physical layout of the Feasa 10D Analyser is shown in Figure 6.
The fiber Patch Cord connectors are labeled 1-10. Options include Feasa 3D, Feasa 6D and
Feasa 10D.
These Analysers are enclosed in an Aluminium box. The Serial port comprises a 3 pin connector
and the USB connector is the mini usb type. All cables are supplied with the Analyser.
Please refer to the fixturing Guidelines Manual for connector pin-out details.

USB Port Control

Connect the LED Analyser to the PC using the supplied USB cable.
Power is supplied through the USB Cable so there is no need to plug in the Power cable.
The installed Software Driver will configure the USB Port automatically.
The USB Port is configured as a Virtual Com Port and will be designated a name such as COM5,
COM6, etc.
© Copyright Feasa Enterprises Ltd
FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
9
10
1 2
8 6
7
4
3 5
Figure 6
Daisy Out
Power
Daisy In
Back to Index
6