Busc# ­ Initiate Capture For All Display Analyser's - Feasa 3D User Manual

FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
Daisy Chain Mode
BusC# - Initiate Capture for all Display Analyser's
Transmit Receive
busc# OK
Where:
# represents the ranges 1, 2, 3, 4, 5.
The Display brightness level for each range is as follows:-
Range 1 = Low
Range 2 = Medium
Range 3 = High
Range 4 = Super
Range 5 = Ultra
Description
This command uses a pre-selected exposure time designated Range1, Range2
etc. For low light or dim Display's use Range 1 and for brighter Display's use
higher ranges. The higher ranges lead to faster test times because the
exposure time is shorter.
This command should be preceded by a BusFree command.
This command instructs all Display Analyser's in the Daisy Chain to capture and
store the Color and Intensity of all the Display's positioned under the fibers
using a fixed range.
The range setting must be specified. The data is stored until the power is
removed or another capture command is issued. When completed the
Analyser will transmit the character OK on the receive line to the transmitting
device (i.e. the PC).Example:
The PC transmits busc# to instruct all Display Analysers in the Daisy Chain to
initiate a Capture cycle.
busc2
OK
Back to Index
© Copyright Feasa Enterprises Ltd 50