BusC
- Initiate Capture for all Display Analyser's
Transmit
Description
This command will cause all Display Analysers in the Daisy Chain to initiate a
capture sequence using the Automatic Range Mode.
manually see the command BusC# on the next page.
After the capture cycle use the the command
specific Display Analyser.
read back the Display Test data.
Example:
The PC transmits busc to instruct all Display Analysers in the Daisy Chain to
initiate a Capture cycle.
busc
OK
© Copyright Feasa Enterprises Ltd
FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
busc
All the standard commands can then be used to
Daisy Chain Mode
Receive
OK
To specify a Range
BusGet####
to activate a
Back to Index
49