Getcalibration ­ Returns The Calibration Set Number - Feasa 3D User Manual

FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
getCalibration - Returns the Calibration Set Number
Transmit Receive
getcalibration #
Where:
# represents the Calibration Set Number in the range 0 – 9.
Description
This command is used to return the Calibration Set Number currently active.
Only one Calibration Set is active at any time.
Example:
The PC transmits getcalibration to the LED Analyser to instruct it to return the
Number of the active Set.
setcalibration
1
Back to Index
© Copyright Feasa Enterprises Ltd 42