FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
Daisy Chain Mode
BusFree - Deactivate any active Analysers
Transmit
Receive
busfree
OK
Description
This command is used to deactivate any active Analysers on the Daisy Chain
Bus.
This will free the Bus to allow an Analyser to be made active.
This
command should be issued at the start of a sequence.
It is the responsibility
of the Controlling Computer to issue commands and monitor the responses.
If
an Analyser does not respond within 500mSec then the Controlling Computer
should issue a new BusFree command and report an error.
The Analyser connected to the computer will operate as a standalone unit after
the command is issued.
Example:
The PC transmits busfree to free up the Daisy Chain Bus.
busfree
OK
Back to Index
© Copyright Feasa Enterprises Ltd
47