Getformat ­ Get The Format Of The Data - Feasa 3D User Manual

FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
Get Data Mode
getFormat - Get the format of the data
Transmit Receive
getformat Keyword
Where:
Keyword is Scientific or Engineering
Description
This command is used to get the format of the data that is returned from the
Analyser.
Two formats are supported :- Scientific or Engineering. If Scientific format is
set then the Luminance data will be in the form #.####e±##cd/m 2 .
If Engineering format is set the data will be in the form ###.####(k)(m)
cd/m 2 .
The format is set by the commands SetEngineeringFormat and
SetScientificFormat.
Example:
The PC transmits getformat to the Display Analyser to instruct it to send the
stored format.
getfactor
scientific
Back to Index
© Copyright Feasa Enterprises Ltd 29