Setcalrgbm - Copy The Factory Set To The Current Set - Feasa 3D User Manual

FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION

setCalRGBM - Copy the Factory Set to the Current Set

Transmit Receive
setcalrgbm OK
Description
This command is used to copy the Factory default Calibration Settings to the
currently active set. Only one calibration set is required per Display type.
The settings in the currently active set will be overwritten with the Factory
settings.
Example:
The PC transmits setcalibration1 to the LED Analyser to instruct it to make
Set 1 the active Calibration Set. The command setcalrgbm will copy the
Factory Settings to Set1.
setcalibration1
OK
setcalrgbm
OK
Back to Index
© Copyright Feasa Enterprises Ltd 43