Capture ­ Store Display Data - Feasa 3D User Manual

FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
Capture Mode
Capture ­ Store Display Data
Transmit Receive
capture OK
Description
This command instructs the Display Analyser to capture and store the Color
and Intensity of the Display positioned in front of the Luminance Heads. The
Analyser automatically determines the correct settings to capture the Display
data. In the case of a 10 channel Analyser the data for all 10 channels is
captured simultaneously and stored in internal memory of the Display Analyser.
The data is stored until the power is removed or another capture command is
issued. When completed the Analyser will transmit the character OK on the
receive line to the transmitting device (i.e. the PC).
This command uses a wide Intensity range to be able to test dim and bright
areas simultaneously. However, if the Displays to be tested are of similar
Intensity then better results may be obtained by using the Capture # command
described on the next page.
Example:
The PC transmits capture to the Display Analyser and the Analyser sends OK
to the PC to acknowledge that the command is completed.
Capture
or
c
OK
Back to Index
© Copyright Feasa Enterprises Ltd 11