Getfactor - Get The Exposure Factor - Feasa 3D User Manual

FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
Get Data Mode
getFactor - Get the exposure Factor
Transmit Receive
getfactor xx
Where:
xx represents the exposure factor value. The default value is 01.
Description
This command is used to get the exposure factor value for all Channels.
The default value set at the factory are 01. The values can be adjusted by the
SetFactor command.
Example:
The PC transmits getfactor to the Display Analyser to instruct it to send the
stored exposure factor for all Channels. The default value is 01.
getfactor
01
Back to Index
© Copyright Feasa Enterprises Ltd 28