Setcalibration# ­ Set The Calibrationto A Particular Set - Feasa 3D User Manual

FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
setCalibration# - Set the Calibrationto a particular Set
Transmit Receive
setcalibration# OK
Where:
# represents the Calibration Set to be selected in the range 0 – 9.
Description
This command is used to select a Calibration set which has been previously
recorded using the Feasa UserCal program. Only one calibration set is
required per Display type. The Factory default set will be programmed into all
sets 0 – 9 when shipped from the factory.
Example:
The PC transmits setcalibration1 to the LED Analyser to instruct it to use the
values stored in Set1 for measurement. The current set can be determined by
transmitting the command getcalibration to the Analyser.
setcalibration1
OK
Back to Index
© Copyright Feasa Enterprises Ltd 41