Daisy Chain Serial Method - Feasa 3D User Manual

FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
Daisy Chain Mode
Daisy Chain SERIAL Method
The Daisy chain is a method used to communicate with multiple Display
Analyser units to save connections and simplify the wiring.
The 1 st Display analyser in the chain is connected to the computer using the
Serial cable supplied. The remaining Display Analysers are interconnected in a
Daisy Chain Bus using the cables provided. The Daisy Chain OUT connector on
Display Analyser No1 is connected to the Daisy Chain IN Connector on Display
Analyser No2 and so on.( See Fig 9b below). Each Analyser must be powered to
5V @180mA. This completes your wiring requirements.
Figure 9b Serial Setup
Back to Index
© Copyright Feasa Enterprises Ltd 45