Ports Description and Wiring.
USB
Serial
The Daisy Chain Connectors are shown on the right-hand side of figure 10.
The D_OUT connector is connected to the D_IN connector of the next Analyser
in the chain.
The Power Connector is used to supply +5V DC to each Analyser in the chain.
Allow 180mA @5V for each Analyser and ensure the wiring is adequate to
supply the current without incurring large voltage drops. For reliable
operation it is necessary to have 5V at the Power Connector of each
Analyser.
© Copyright Feasa Enterprises Ltd
FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
Daisy Chain Mode
Figure 10
1
D_OUT
2
3
0V
Power
5V
1
D_IN
2
3
Back to Index
52