Getwavelengthoffset## - Get The Dominant Wavelength Offset - Feasa 3D User Manual

FEASA DISPLAY ANALYSER
FUNCTIONAL VERSION
Get Data Mode
getWavelengthOffset##
- Get the Dominant Wavelength Offset
Transmit Receive
getwavelengthoffset## +/-XX
Where:
## represents the Channel Number and is a number in the range 1 – 10.
+/- xx represents the wavelength offset in nanometers.
Description
This command is used to get the value of the Dominant Wavelength Offset set
for Channel number ##.
The range of value that can be programmed is +/-99, however setting a value
of greater than +/-10 would probably indicate an error in your measurement
setup.
Example:
The PC transmits getwavelengthoffset01 to the Display Analyser to instruct
it to send the programmed dominant wavelength offset for Channel No 1. The
Display Analyser will return a string +/- xx to the PC.
getwavelengthoffset01
+07
Back to Index
© Copyright Feasa Enterprises Ltd 26