Well Heat - Structural Concepts FUSION GMSV6H User Manual

WELL HEAT

Well Heat
 Turn on main power switch.
 Well heat is controlled by Carel® iJF
Programmable Controllers.
 Each programmable controller controls the heat
to one set of pans (as illustrated below).
 Programmable controllers are pre-set at the
factory to heat wells at proper temperatures.
Modifications to these settings should be rare.
 Should programmable controllers need to be
revised, see CAREL® iJF PLATFORM
PROGRAMMABLE CONTROLLER section in
this User Manual for additional information.
Note: Illustration Shown May Not
Exactly Reflect Every Feature or
Option of Your Particular Case.
9