Structural Concepts FUSION GMSV6H User Manual page 3

Table of Contents

Advertisement

OVERVIEW / TYPE / TEMP / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING - PAGE 1 of 2
OVERVIEW
This merchandiser is designed for dry heating operations
throughout the product area. The heat is generated from
electric rod well warmers, overhead ceramic heaters and
overhead ceramic metal halide lamps.
This merchandiser is designed for display of
perishable, unpackaged heated products.
This merchandiser IS NOT designed to heat products
up; product must be pre-heated PRIOR to its display.
Cases should be installed and operated according to
this operating manual's instructions to ensure proper
performance.
Improper use will void warranty.
TYPE
This unit is designed for the display of products in ambient
store conditions where temperatures and humidity are
maintained within a specific range.
Ambient conditions are to be at 55% max. humidity
and maximum temperatures of 75 °F (24 °C).
WARNING
ELECTRICAL
HAZARD
WARNING
HOT
SURFACE
WARNING
HOT
SURFACE
INTEGRATED AVERAGE PRODUCT TEMPERATURE
COMPLIANCE
WARNINGS
PRECAUTIONS and WIRING DIAGRAMS
This equipment MUST be installed in compliance with
all applicable NEC, federal, state and local
electrical and plumbing codes.
Risk of electric shock. Disconnect power before servicing unit.
CAUTION! More than one source of electrical supply is
employed with units that have separate circuits.
Disconnect ALL ELECTRICAL SOURCES before servicing.
Pans and Wells Are Hot!
Disconnect and allow to cool
before cleaning or removing from case.
Ceramic Heaters and Ceramic Metal Halide Lamps Are Hot!
Turn Off or Disconnect and Allow to Cool
Before Servicing or Replacing.
3
The Structural Concepts® Fusion Service Deli
Merchandisers are designed to merchandise product
at an integrated average product temperature of
150 °Fahrenheit / 66 °Celsius.
Performance issues when in violation of applicable
NEC, federal, state and local electrical and plumbing
codes are not covered by warranty.
See below compliance guideline.
This page contains important warnings to prevent
injury or death.
Please read carefully!
See next page for PRECAUTIONS and WIRING
DIAGRAM information.
COMPLIANCE
WARNING
WARNING
WARNING

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FUSION GMSV6H and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Fusion gmsv4hFusion gmsv8hFusion gmsv8h.7215

Table of Contents