Replacing The Left Side Panel - HP Visualize c3600 Upgrade Instructions

System Board Removal/Replacement

Replacing the Left Side Panel

Replacing the Left Side Panel
1. Replace the left side panel by holding it an angle and inserting its top
Figure 2-22 Opened Side Panel
Side-Panel Thumbscrew
2. Replace the two T-15 Torx thumbscrews that secure the left side
3. For each of the two SCSI connectors on the rear wall of the chassis,
4. The LVD SCSI bus must be properly terminated.
42
and bottom hinge hooks with their respective slots in the chassis.
Swing the back edge of the panel toward the back of the workstation
and press the panel firmly into place.
Hinge Slots
panel to the chassis.
replace either the external SCSI devices (if you had any such devices
attached previously) or the appropriate terminator (if you didn't have
any external devices attached). One or the other must be in place.
1
2
Side-Panel Hook
Chapter 2