Replacing The Side Panel - HP Presario SG3000 - Desktop PC Manual

4
Upgrading and Servicing Guide

Replacing the Side Panel

1 Align the tabs at the bottom of the side panel to the ridge on the bottom of the chassis.
Place the side panel in the proper position on the chassis and slide it toward the front
of the chassis.
A
NOTE: There is a 3mm gap between the top of the side panel and the top of the
chassis when the side panel is attached properly.
2 Ensure that the hole for the thumbscrew aligns with the hole in the chassis, and then
replace the thumbscrew (A).
3 See "After Closing the PC" on page 3.