Removing The Memory Cards (Dimms) - HP b2600 Upgrade Instructions
Visualize c class unix workstations
Hide thumbs
Also See for b2600:
- Reference manual (486 pages) ,
- Technical reference (206 pages) ,
- Administration manual (171 pages)
Table of Contents
Advertisement
Upgrading Your System
Removing the Memory Cards (DIMMs)
Removing the Memory Cards (DIMMs)
1. Press downward on the ejector tabs located on each side of the memory card (DIMM) slot.
Figure 2-11
Removing a DIMM
2. Grasp the memory card by its edges and lift it straight out. Place the card on the conductive sheeting.
3. Locate the label that shows memory installation sequence for later reference.
4. Repeat steps 1 and 2 for all memory cards.
17
Chapter 2
Advertisement
Table of Contents
