Epever IPT Series User Manual page 38

Output frequency
Output wave
Output distortion THD
Load power factor
Rated input voltage
Input voltage range
②
Rated output efficiency
③
Max. output efficiency
Idle current
No-load current
RS485 com. port
Mechanical parameters
Input terminal
Dimension (L x W x H)
Mounting size
Mounting hole size
Net Weight
① The "Surge current when power on" parameter is for the customized products with an anti-surge function (whose product model has "S"). For
other products, the actual surge current prevails.
② It means the rated output efficiency when the load power equals the "continuous output power" under the rated DC input voltage.
③ It means the max. output efficiency when the inverter is connected with different loads under the rated DC input voltage.
Parameter
Continuous output power
Surge power
Surge current when power
12VDC
10.8 ~ 16.0VDC
> 89.0%
> 90.0% (70% loads)
< 0.15A
< 0.9A
M6
229 × 160 × 73mm
205 × 75mm
Φ5mm
1.5kg
IPT1000-12 IPT1000-22
1000W@35℃@Rated input voltage
2000W@5S
< 100A
50/60Hz ± 0.2%
Pure Sine Wave
THD ≤ 3% (Resistive load)
0.2 ~ 1 (Load power ≤ Continuous output power)
24VDC
21.6 ~ 32VDC
> 90.0%
> 91.5% (70% loads)
< 0.10A
< 0.4A
5VDC/200mA
IPT1500-12
< 100A
35
12VDC
10.8 ~ 16.0VDC
> 89.5%
> 91.0% (40% loads)
< 0.15A
< 0.9A
M6
286 × 160 × 73mm
262 × 75mm
Φ5mm
2.3kg
IPT1500-22
1500W@35℃@Rated input voltage
3000W@5S
< 100A
24VDC
21.6 ~ 32VDC
> 91.5%
> 92.0% (40% loads)
< 0.10A
< 0.6A
IPT1500-42
< 50A