Epever IPT Series User Manual page 26

Step3: Press for 2s to enter the configuration interface of the specified parameter.
Step4: Click or
Step5: Press for 2s to confirm the configuration.
Step6: Click +
Parameters user define：
Display
Output voltage class
Output frequency class
Power Saving Enable
Low voltage disconnect
Low voltage reconnect
Over voltage reconnect
Over voltage disconnect
① After configuring the parameters marked with ①, the inverter will restart automatically. It will
resume work according to the new parameter value.
② Due to the length limit of the LCD displayed data. When the baud rate is set to 115200, the
to configure the parameter value.
to exit the current interface.
Parameters
①
①
LCD backlight time
Power Saving In
Power Saving Out
②
Baud Rate Select
③
voltage
③
voltage
③
voltage
③
voltage
Default
220VAC
110VAC
220/230/240VAC:
50Hz
100/110/120VAC:
60Hz
30s
OFF
20VA
40VA (20VA + PSI) ~ (50%*rated power)
115200
12V: 10.5V~14.2V; step size 0.1V
12V: 10.8V
24V: 21.6V
48V: 43.2V
12V: 11.5V~15.2V; step size 0.1V
12V: 12.5V
24V: 25V
48V: 50V
12V: 11.5V~15.2V; step size 0.1V
12V: 14.5V
24V: 29V
48V: 58V
12V: 10.5V~14.2V; step size 0.1V
12V: 16V
24V: 32V
48V: 64V
23
User define
220VAC/230VAC/240VAC
100VAC/110VAC/120VAC
50Hz/60Hz
30s/ 60s/100s(ON solid)
ON/OFF
20VA ~ (20%*rated power)
9600/115200
24V: 21V-30.2V; step size 0.1V
48V: 42V-62.4V; step size 0.1V
24V: 22V-31.2V; step size 0.1V
48V: 43V-63.4V; step size 0.1V
24V: 22V-31.2V; step size 0.1V
48V: 43V-63.4V; step size 0.1V
24V: 21V-30.2V; step size 0.1V
48V: 42V-62.4V; step size 0.1V