Adjusting The Ringing Volume; Muting The Microphone Pod - RADVision SCOPIA XT5000 Series User Manual

Adjusting the Ringing Volume

When not in a meeting, you can set the ringing tone of the incoming call to a comfortable hearing
level.
Press
call.
To change the default ringing volume, perform the procedure in this section.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
Select the User settings tab.
Step 3
Select General under Call-Answer mode.
Step 4
Drag the Ringing volume slider to set the value.
Step 5
Select Save.

Muting the Microphone Pod

You can mute the Microphone Pod in your room if you do not want participants at the remote site
to hear you.
Press
The
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
+ or - on the XT Remote Control Unit to adjust the sound you are hear when receiving a
on the XT Remote Control Unit or press the Mute button on the Microphone Pod. The
icon appears on the display.
icon shows that the Microphone Pod of the remote endpoint is muted.
Figure 7-10 Call-Answer settings
Managing Calls and Videoconferences | 44