RADVision SCOPIA XT5000 Series User Manual page 21

Step 3
Select General under Preferences.
Step 4
Enter the code in the Remote control code field.
Step 5
Select Save.
Step 6
On the XT Remote Control Unit, press
The On/Off key on the XT Remote Control Unit turns red.
Step 7
Using the keypad, type the number you just entered in the Remote control code field.
Note:
Step 8
Select Finish.
The code of the XT Remote Control Unit is changed and the Remote Control
Remote Control code appear at the top of the screen.
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Figure 3-8 Setting the XT Remote Control Unit Code
You must always use two digits for a code. For example, to set the code to "1", enter
"01".
and simultaneously.
icon and the new
Getting Started | 16