Lan And Power Cables - Cisco IAD2430 Series Hardware Installation Manual

Chapter 3 Installing Cisco IAD2430 Series IADs
to, or not shielded from, the off-premise wiring or power cables during a lightning strike or power
surge, the on-premise wiring can carry a dangerous discharge to the attached interface, equipment,
and nearby personnel. Statement 338
Table 3-2
Cisco IAD2430 series FXS ports.
Table 3-2
NEBS Tests
50 V/0.33 A; 15 minutes
100 V/0.17 A; 15 minutes
200 V/1.00 A; 1–second pulses, 60 repetitions
The installation must comply with all applicable codes.
Note

LAN and Power Cables

The LAN and power cables and connections are described in
Figure
Table 3-3 LAN, Administrative Access, and Power Cable Selection
Port or Connection Color or Type Connected To
Fast Ethernet Yellow
Console Light blue
Auxiliary Black
Power (not shown) Power
1. Power cables vary to meet local requirements.
OL-4234-06
shows the results of the NEBS Type 1/3 power line cross tests performed on the
Results of the NEBS Power Line Cross Tests on FXS Ports
3-18.
Fast Ethernet switch
PC or ASCII terminal
communication (COM) port
Modem for remote access
100–240 VAC, 50–60 Hz
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
Results
Passed
Passed
Passed
Table 3-3 and shown in
Cable
Straight-through Fast Ethernet cable (not included)
RJ-45-to-DB-9 console cable (included)
RJ-45-to-DB-25 auxiliary cable (included)
Grounding power cord (included)
Connecting Cables
Figure 3-17 and
1
3-19