Rack-Mounting The Chassis - Cisco IAD2430 Series Hardware Installation Manual

Rack-Mounting the Chassis

Inspect all items for shipping damage. If anything appears damaged, or if you encounter problems when
installing or configuring your system, contact a customer service representative. (See the
Documentation and Submitting a Service Request" section on page
Rack-Mounting the Chassis
Your chassis ship with a pair of brackets for use with a 19-inch rack or for use for wall mounting on the
wall (see
but can be ordered through Cisco.). The bracket is shown in
Figure 3-2
Rack-mount brackets for 19-inch rack, NEBS grounding kit, and chassis guard for wall-mounting
Note
applications are not included with the Cisco IAD2435-8FXS.
Figure 3-3
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
3-6
Figure 3-9) (Brackets are not included with the Cisco IAD2435 IAD chassis (see
Quick Installation Bracket for all Cisco IAD2430 Series Routers Except for
Cisco IAD2435 IAD
Quick Installation Bracket for Cisco IAD2435-8FXS Routers
Chapter 3 Installing Cisco IAD2430 Series IADs
xvi.)
Figure 3-2.
"Obtaining
Figure 3-3),
OL-4234-06