Cisco IAD2430 Series Hardware Installation Manual page 52

Installing the Ground Connection
Figure 3-13
Step 4 Attach the ground lug or ring terminal to the chassis as shown in
Figure
terminal, use one of the screws provided. Use a number 2 Phillips screwdriver, and tighten the screws
to a torque of 8 to 10 in-lb (0.9 to 1.1 N-m).
Note
Figure 3-14
Ground lug
Figure 3-15
1 Grounding lug
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
3-16
Crimping a Ground Lug onto the Ground Wire
3-16. For the ground lug, use the two screws with captive locking washers provided. For a ring
You can orient the crimped end of the ground lug in either direction (right or left).
NEBS-Compliant Chassis Ground Connection Using Ground Lug
Ground Lug Location on the Cisco IAD2435 IAD
FX S
IA D 2 4 3 5 -8
F X S
W AN
Fa stE th er
ne t
T1 /E 1
0/ 1
0/ 0
CO NS OL E
AU X
12 V DC
SA
1
Chapter 3 Installing Cisco IAD2430 Series IADs
Figure 3-14, Figure 3-15, or
OL-4234-06