Table of Contents
Advertisement
Using the Instrument Software
11.
Adjust the output of the Permeant Sensor using the "OTR Calibration" screen. Refer to the
Instrument Help System for more information on performing an adjustment.
NOTE:
Calibration films should be stored in a manner that will keep them clean and free from
wrinkles. MOCON Certified NIST Films should be stored in the provided case. You will need
to use these films again whenever the instrument needs re-calibration.
5-4
OX-TRAN Model 2/12 R Operator's Manual
Revision L
MOCON, Inc.
Advertisement
Table of Contents
