Setting Up
Back Panel Parts and Controls
The names and locations of the parts and controls located on the back of the instrument are shown in
Figure 2-3 and Table 2.2.
5
4
3
2
1
Item
Name
1
Power In
2
Fuse Holder
3
Power Switch
4
Test Gas Inlet Port
5
Carrier Gas Inlet Port
6
Cooling Fan
7
Network Port
8
USB Ports
9
Enclosure Fans
2-4
Figure 2-3: Back Panel Parts and Controls
Description
The connector the power cord attaches to.
The fuse holder contains the fuses used to protect the instrument.
The switch that is used to turn the instrument on and off.
l is ON
О
is OFF
The fitting that connects the test gas supply to the instrument.
The fitting that connects the carrier gas supply to the instrument.
The fan that supplies cooling air to the test cell heating/cooling system.
A 10/100T Ethernet port for connection to a network.
USB 2.0 Ports for connection of USB devices (keyboard, mouse).
The fans that supply cooling air to the instrument enclosure.
Table 2.2: Back Panel Parts and Controls
Revision L
OX-TRAN Model 2/12 R Operator's Manual
9
6
7
8
MOCON, Inc.