Table of Contents
Advertisement
Chapter 18 Store and Load
1. Chinese Input Method
If the current input method is "中/繁/En", please go to Step 2. If the current
input method is "En/中/繁" or "繁/En/中", rotate the multifunction knob
select the input switch key and press the knob
中/繁/En". "中" is located first and highlighted.
2. Clear the Pinyin Input Area and Name Input Area
If there is no character in the "Pinyin Input Area" and "Name Input Area", please
go to Step 3. If there are characters in the "Name Input Area" and "Pinyin Input
Area", press rotate the multifunction knob
delete all the characters in the name input area in order.
3. Input the first Chinese character "文"
1)
Input the pinyin "wen" in the "Pinyin Input Area"
Rotate the multifunction knob
"wen" and press down the knob to input "w" in the "Pinyin Input Area". Use
the same method to input the remaining letters "en" in the pinyin "wen".
After finishing the input, the Chinese characters available are displayed in
the "Chinese Character Selecting Area".
2)
Select the desired Chinese character from the "Chinese Character Selecting
Area"
Rotate the multifunction knob
then "文" is input in the "Name Input Area". If the Chinese character is not
found in the current page, press
the desired character.
4. Input the Other Characters
Refer to Step 3 and use the same method to input the remaining Chinese
characters "件名" in sequence.
MSO7000/DS7000 User Guide
Pinyin Input Area
to select the first letter "w" in the pinyin
to select "文", and press down the knob,
to go to the next page until you find
Chinese Character Selecting Area
continuously to switch to "
to select the delete key
RIGOL
to
to
18-13
Advertisement
Table of Contents
