Rigol MSQ7054 User Manual page 319

Chapter 18 Store and Load
This oscilloscope supports Chinese/English input method. The length of the folder
name is limited to 10 bytes (one Chinese character occupies two bytes). The
following part introduces how to input a folder name using Chinese/English input
method.
Tip
During the name input, rotate the multifunction knob
contents. Press down the knob to input the desired contents, or enable the touch
screen and tap the desired contents to select it.
English Input Method
For example, create a folder with the name "Filename".
Name Input Area English Selection Area Letter Input Area Virtual Keypad
Go to
Previous Page
Upper/lower
Case Switch
Input Method
Input Method
Switch
Switch
Input Method
1. Select English Input Method
If the current input method is "En/中/繁", please go to Step 2. If the current
Switch
input method is "中/繁/En" or "繁/En/中", rotate the multifunction knob
select the input switch key and press the knob
"En/中/繁". "En" is located first and highlighted.
2. Clear the Name Input Area
If there is no character in the "Name Input Area", please go to Step 3. If there
are characters in the "Name Input Area", press rotate the multifunction knob
to select the Delete key
in order.
3. Input the First Character "F"
1) If the current setting is uppercase input, please go to Step 2). If the current
setting is lowercase input, rotate the multifunction knob
"Caps" and press down the knob to switch to the uppercase input.
MSO7000/DS7000 User Guide
to delete all the characters in the name input area
to select the desired
Go to Next
Page
continuously to switch to
RIGOL
to
to select
18-11