Rigol MSQ7054 User Manual page 348

RIGOL
panel to capture the screen.
Operation Type

Press Operation and then rotate the multifunction knob
Image". Press down the knob to select it. You can also press Operation
continuously to select among the options, or enable the touch screen to tap
the desired operation type.
Image Format

Press Format and then rotate the multifunction knob
image format. You can also press Format continuously to select among the
options, or enable the touch screen to tap the desired image format. The
image formats include "*.png", "*.bmp", "*.jpg", and "*.tif".
Invert

Press Invert continuously to enable or disable the invert function.
Color

Press Color continuously to set the color of the saved image to "Color" or
"Gray".
2. Waveform Saving
When the Quick shortcut key is set to "Save Wave", press Quick on the front
panel to save the waveform.
Operation Type

Press Operation and then rotate the multifunction knob
Wave". Press down the knob to select it. You can also press Operation
continuously to select among the options, or enable the touch screen to tap
the desired operation type.
Data Source

Press Data Source continuously to select "Memory" or "Screen" as the
source of the saved waveform.
Format

Press Format and then rotate the multifunction knob
waveform format. Press down the knob to select it. You can also press
Format continuously to select or enable the touch screen to tap the format.
When Data Source is "Screen", the available formats are "*.bin" and "*.csv".
When Data Source is "Memory", the available formats are "*.bin", "*.csv",
and "*.wfm".
Storage Channel

If "Memory" is selected under Data Source, you need to set the storage
19-14
Chapter 19 System Utility Function Setting
MSO7000/DS7000 User Guide
to select "Save
to select the
to select "Save
to select the