Rigol MSQ7054 User Manual page 49

Chapter 1 Quick Start
17. Digital Channel Status Area
Displays the current status of the 16 digital channels. The digital channels
currently turned on are displayed in green, and the currently selected digital
channel is highlighted in red. The digital channels turned off are displayed in
gray.
Note: This function is only available for the MSO7000 model.
18. CH4 Status Label
Displays the status of CH4.

Displays the vertical scale of CH4. That is, the voltage value per grid of CH4

in the vertical axis.
Displays the offset of CH4, i.g. the vertical offset of CH4 waveform.

Different labels will be displayed according to the current channel setting.

For example, if you select "DC" for channel coupling,
enable the bandwidth limit,
impedance,
19. Message Box
Displays the prompt messages.
20. CH3 Status Label
Displays the status of CH3.

Displays the vertical scale of CH3. That is, the voltage value per grid of CH3

in the vertical axis.
Displays the offset of CH3, i.g. the vertical offset of CH3 waveform.

Different labels will be displayed according to the current channel setting.

For example, if you select "DC" for channel coupling,
enable the bandwidth limit,
impedance,
21. CH2 Status Label
Displays the status of CH2.

Displays the vertical scale of CH2. That is, the voltage value per grid of CH2

in the vertical axis.
Displays the offset of CH2, i.g. the vertical offset of CH2 waveform.

Different labels will be displayed according to the current channel setting.

For example, if you select "DC" for channel coupling,
enable the bandwidth limit,
impedance,
22. CH1 Status Label
Displays the status of CH1.

Displays the vertical scale of CH1. That is, the voltage value per grid of CH1

in the vertical axis.
Displays the offset of CH1, i.g. the vertical offset of CH1 waveform.

Different labels will be displayed according to the current channel setting.

MSO7000/DS7000 User Guide
is displayed.
is displayed.
is displayed.
is displayed; if you select "50 Ω" for
is displayed; if you select "50 Ω" for
is displayed; if you select "50 Ω" for
RIGOL
is displayed; if you
is displayed; if you
is displayed; if you
1-25