Reinstalling the Expansion Board
Assembly
To reinstall an expansion board assembly, follow these steps:
1.
Turn off the workstation. Disconnect the power cord from the grounded
AC outlet and from the back of the workstation.
2.
Slide the expansion board assembly
rails and tab(s) .
Align the holes in the back of the chassis 3.
3.
4.
Press the expansion board assembly firmly over the connector.
3
1
Figure 6-5. Reinstalling the expansion board assembly
into the chassis aligning the guide
3
2
Compaq Professional Workstation SP700 Reference Guide
6-9