HP Compaq SP700 Reference Manual page 159

D-6 POST Error Messages
POST Error Messages and Codes
1793-Secondary
Controller or Disk Failure
A Critical Error Occurred
Prior to this Power-Up
A Collectable Memory
Error Occurred Prior to
this Power-Up
This Workstation has
experienced an NMI
(Hardware Error)
Fixed Disk Parameter
Table or BIOS Error
System Halted
XX000Y ZZ Parity
Check 2
Audible (beep)
Invalid Electronic
Serial Number
(RESUME=
"F1" KEY)
Error Code
An error has been detected with
the CD-ROM interface.
Critical failure (POST) recorded
into the wellness log.
Single-bit ECC during POST.
As indicated.
Configuration or hardware
failure.
Parity RAM failure.
Power-on successful.
The electronic serial number is
corrupt.
As indicated to continue.
Continued
Probable Source
of Problem Action
Run the Diagnostics
utility.
None.
None.
None.
Run the Setup and
Diagnostics utilities.
Run the Setup and
Diagnostics utilities.
None.
Run the Setup and
Diagnostics utilities.
Press the F1 key.