Ps2 Connectors; Hp Parallel I/O Connector; Audio Connectors; Optional Teleshare Board Connectors - HP Model 712/100 - Workstation Handbook

NOTICE: When attaching external SCSI devices, be sure to
terminate the last device on the external SCSI bus. If
no external devices are attached, the SCSI connector
does not need to be terminated.

PS2 Connectors

The PS2 connectors provide an interface for the system's keyboard and mouse.

HP Parallel I/O Connector

The 25–pin HP Parallel I/O interface uses Centronics interface protocols to support
peripheral devices such as printers and plotters.

Audio Connectors

The workstation has audio input and output capability through external input and
output connectors on the rear panel and through an internal speaker. The rear panel
contains the Audio/Headphone OUT, Audio/Mic IN, and Line IN connectors.
The Audio/Headphone OUT connector is a stereo headphone output. The Audio/Mic
IN connector is a mono microphone input. The ring connector of the microphone
jack supplies +5 volts dc for microphones that require it. The audio line in connector
is a standard stereo audio mini–jack and uses audio "line" levels. For more informa-
tion on the audio capability of the workstation see the Audio Users Guide.

Optional TeleShare Board Connectors

The workstation has a slot for an optional TeleShare board. The external connectors
for the TeleShare board are accessible in this location. This board has dual line, FAX,
modem, and telephone features (caller ID, call progress decoder, ringback busy, fast
busy, and call waiting, for example).

Optional Expansion Board Connectors

The system has an expansion board slot for an additional I/O board. HP offers a vari-
ety of I/O expansion boards that support graphics, 802.5 IBM token ring, RS–232
SIO, LAN AUI, and X.25 data link (HDLC) connections.
Product Information 1–7