Cable Lock Provision - HP Compaq SP700 Reference Manual

3-16 Intelligent Manageability

Cable Lock Provision

The cable lock provision consists of a two-piece security bracket. The bottom
part of the bracket is attached to the workstation with a screw; the top part of the
bracket covers the screw and prevents its removal.
NOTE: The security bracket can be used with a padlock to inhibit access to
the interior of the workstation, which prevents unwanted configuration changes
or component removal. For increased security, a cable lock can be installed to
secure the workstation to a fixed object.
To install the security bracket:
1. Separate bracket A and bracket B by bending the metal back and forth
where the two pieces join.
Figure 3-2. Separating the security brackets
2. Insert the tab on bracket A into the notch on the rear of the workstation
until the bracket is positioned flat against the side access panel.
3. Align the hole on the flat portion of bracket A with the screw hole on the
side access panel.
B
A