Symbols On Equipment - HP Compaq SP700 Reference Manual

Symbols on Equipment

These icons may be located on equipment in areas where hazardous conditions
may exist.
Any surface or area of the equipment marked with these
symbols indicates the presence of electrical shock hazards.
Enclosed area contains no operator serviceable parts.
WARNING: To reduce risk of injury from electrical shock
hazards, do not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates
a Network Interface Connection.
WARNING: To reduce risk of electrical shock, fire, or
damage to the equipment, do not plug telephone or
telecommunications connectors into this receptacle.
Any surface or area of the equipment marked with these
symbols indicates the presence of a hot surface or hot
component. If this surface is contacted, the potential for
injury exists.
WARNING: To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
WARNING: To reduce the risk of electric shock or damage to
the equipment:
To reduce the risk of injury from laser radiation or damage to the
equipment, observe the following precautions with the CD-ROM
drive:
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical
outlet that is easily accessible at all times.
Disconnect power from the workstation by unplugging the
power cord from either the electrical outlet or the
workstation.
Compaq Professional Workstation SP700 Reference Guide
xi