11.7
Removing fork legs
11.8
Installing the fork legs
SERVICE WORK ON THE CHASSIS 11
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove screws
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not kink the brake line.
A00084-10
(TC 50)
–
Loosen screws
–
Loosen screws
F02897-10
(TC 50 MINI)
–
Loosen screws
–
Loosen screws
F02896-10
Main work
(TC 50)
–
Position the fork legs.
Bleeder screws
Info
The second milled groove in the fork leg must
be flush with the upper edge of the upper triple
clamp.
F02179-10
p. 42)
(
p. 93)
1
and take off the clamp.
2
and take off the brake caliper.
3
. Remove the left fork leg.
4
. Remove the right fork leg.
3
. Remove the left fork leg.
4
. Remove the right fork leg.
1
are positioned toward the rear.
45