Carburetor - Idle Setting (Tc 50); Carburetor - Idle Setting (Tc 50 Mini) - Husqvarna TC 50 2023 Owner's Manual

15 TUNING THE ENGINE
15.3
15.4
106
400192-11
Carburetor – idle setting (TC 50)
K01224-10
Carburetor – idle setting (TC 50 MINI)
A00106-10
–
2
Turn barrel adjuster so that there is play
cable at the throttle grip.
Guideline
Play in throttle cable
–
3
Tighten nut .
–
1
Slide on sleeve .
Finishing work
–
Install the fuel tank. (
–
Install the left side cover. (
–
Install the right side cover. (
–
Mount the seat. ( p. 62)
–
Check the play in the throttle cable. (
The idle setting of the carburetor has a big influence on the
starting behavior, stable idle speed, and the response to throttle
opening. This means that an engine with a correctly set idle
speed will be easier to start than one with an incorrectly set idle
speed.
Info
The carburetor and its components are subject to
increased wear caused by engine vibration. Wear can
result in malfunctioning.
The idle speed is adjusted using the idle speed adjusting
1
screw .
The idle mixture is adjusted using the idle air adjusting screw
The idle setting of the carburetor has a big influence on the
starting behavior, stable idle speed, and the response to throttle
opening. This means that an engine with a correctly set idle
speed will be easier to start than one with an incorrectly set idle
speed.
Info
The carburetor and its components are subject to
increased wear caused by engine vibration. Wear can
result in malfunctioning.
The idle speed is adjusted using the idle speed adjusting
1
screw .
The idle mixture is adjusted using the idle air adjusting screw
A
in the throttle
3 ... 5 mm (0.12 ... 0.2 in)
p. 54)
p. 59)
p. 57)
p. 105)
2
.
2
.