Checking The Brake Linings Of The Rear Brake - Husqvarna TC 50 2023 Owner's Manual

12 BRAKE SYSTEM
12.14
88
F03004-10
H01654-10

Checking the brake linings of the rear brake

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
F02204-10
Main work
–
1
Remove screws .
–
2
Take off cover with washer
–
Add brake fluid up to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the washer and membrane.
–
Mount and tighten the screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
Finishing work
–
Remove the motorcycle from the lift stand. (
(TC 50)
–
Check the brake linings for minimum thickness
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
» If damage or wear is encountered:
–
Change the rear brake linings.
3 4
and membrane
A
.
10 mm (0.39 in)
p. 137)
p. 42)
A
≥ 1 mm (≥ 0.04 in)
A
( p. 89)
( p. 89)
.
.