11.4
Cleaning the dust boots of the fork legs
SERVICE WORK ON THE CHASSIS 11
(TC 50 MINI)
–
Release bleeder screws
Any excess pressure escapes from the interior of the
fork.
–
Tighten the bleeder screws.
F02192-10
Finishing work
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the fork protector. (
Main work
–
Push dust boots
Info
The dust boots remove dust and coarse dirt parti-
cles from the inside fork tubes. Over time, dirt can
accumulate behind the dust boots. If this dirt is not
removed, the seals rings behind can start to leak.
S00886-10
Warning
Danger of accidents Oil or grease on the brake
discs reduces the braking effect.
–
Always keep the brake discs free of oil and
grease.
–
Clean the brake discs with brake cleaner when
necessary.
–
Clean and oil the dust boots and inside fork tubes of both
fork legs.
Universal oil spray (
–
Press the dust boots back into the installation position.
–
Remove the excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
1
.
p. 42)
p. 44)
1
of both fork legs downward.
p. 140)
p. 44)
p. 42)
p. 42)
43