Checking The Chain For Dirt; Cleaning The Chain - Husqvarna TC 50 2023 Owner's Manual

11.38

Checking the chain for dirt

11.39

Cleaning the chain

Warning
Danger of accidents Lubricants on the tires reduces the road grip.
–
Remove lubricants from the tires using a suitable cleaning agent.
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
The service life of the chain depends largely on its maintenance.
SERVICE WORK ON THE CHASSIS 11
(TC 50 MINI)
–
Position the engine sprocket cover. Mount screws
do not tighten yet.
–
Mount and tighten screw
Guideline
Screw, engine
sprocket cover
–
Tighten screws
A00100-10
Guideline
Screw, engine
sprocket cover
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. (
400678-01
Preparatory work
–
Raise the motorcycle with a lift stand. (
2
.
M8 15 Nm (11.1 lbf ft)
1
.
M8 15 Nm (11.1 lbf ft)
p. 42)
p. 67)
p. 42)
1
but
67