Installing The Rear Wheel - Husqvarna TC 50 2023 Owner's Manual

13 WHEELS, TIRES
13.4
96
F02175-11

Installing the rear wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
F02176-11
F02210-11
F02209-11
–
5
Remove spacers
Main work
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease the contact surfaces
Long-life grease ( p. 139)
–
Insert the spacers.
Info
Insert the wide spacer on the left in the direction of
travel.
(TC 50)
–
Clean and grease wheel spindle
Long-life grease (
–
Position the rear wheel and insert wheel spindle.
The brake linings are correctly positioned.
–
Mount the chain.
–
Position chain adjuster
wheel spindle in all the way.
–
3
Mount nut , but do not tighten it yet.
–
Make sure that the chain adjusters are fitted correctly on
the adjusting screws.
–
Check the chain tension. (
–
3
Tighten nut .
Guideline
Nut, rear wheel
spindle
–
Operate the foot brake lever repeatedly until the brake
linings are in contact with the brake disc and there is a
pressure point.
.
A
of the spacers.
1
.
p. 139)
2
on both sides and push the
p. 68)
M12x1 40 Nm (29.5 lbf ft)