Installing The Engine Guard (Rockstar Edition); Removing The Fork Legs - Husqvarna FC 450 2020 Owner's Manual

11.8

Installing the engine guard (ROCKSTAR EDITION)

11.9

Removing the fork legs

SERVICE WORK ON THE CHASSIS 11
–
Remove screw
K01066-10
–
Position the engine guard on the frame.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
K01066-11
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
K01065-11
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove screws
–
Allow the brake caliper and the brake line to hang loosely to
the side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
S02315-10
2
. Remove the engine guard.
1
.
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
p. 52)
( p. 107)
1
and take off the clamp.
2
and take off the brake caliper.
55