11 SERVICE WORK ON THE CHASSIS
11.10
48
Installing the lower triple clamp
F02885-10
V02097-10
F02179-11
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing
–
Check whether upper steering head seal
tioned.
–
3
Push on protective ring
–
Position the upper triple clamp with the handlebar.
–
4
Mount nut
, but do not tighten it yet.
(TC 50)
–
Position the fork legs.
5
Bleeder screws
Info
The second milled groove (from the top) must
be flush with the upper edge of the upper triple
clamp.
p. 139)
1
.
2
is correctly posi-
.
are positioned toward the rear.