Removing The Rear Wheel - Husqvarna TC 50 2023 Owner's Manual

13 WHEELS, TIRES
13.3
94
H01198-10
A00087-11
V00545-10

Removing the rear wheel

F02209-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease the contact surfaces
Long-life grease ( p. 139)
–
Insert the spacers.
–
Clean and grease the wheel spindle.
Long-life grease ( p. 139)
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front M10
wheel spindle
–
Operate the hand brake lever several times until the brake
linings are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
2
Tighten screws .
Guideline
Screw, fork stub
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
(TC 50)
–
1
Remove nut .
–
Take off chain adjuster
A
of the spacers.
1
.
40 Nm (29.5 lbf ft)
Loctite
p. 42)
M6 10 Nm (7.4 lbf ft)
p. 42)
2
.
®
243™